제품이 장바구니에 추가됨

Fiber Optic Diffuse Axial Illuminators

4

4" Fiber Optic Diffuse Axial Illuminators (#53-381)

4 Suggested Assembly (Platform, Post, and Adapter Not Included) 2 Suggested Assembly (Illuminator Not Included)
×
  • 반사형 타깃의 분산 조명
  • 차가운 빛이 고르게 분배

액세서리: 이 부품을 사용하면 2" x 2" 및 4" x 4" axial illuminator를 마운팅 시스템의 standard ¾" post에 부착할 수 있습니다. ¾" Post Adapter를 단독으로 사용하면 포스트에서 대략 3" 정도 떨어진 곳에 illuminator의 중심이 위치합니다. Swivel Arm을 추가하면 포스트에서 3" - 6½" 떨어진 거리에 illuminator를 자유롭게 위치시킬 수 있습니다.

공통 스펙

Packing Fraction (%):
83% nominal
Type of Illumination:
Fiber Optic Light Guide
Geometry:
Diffuse Axial
Construction:
Black Anodized Aluminum
Numerical Aperture NA:
0.55 nominal
Fiber Diameter (μm):
50 (0.002" nominal)
Transmission Loss:
10% per ft. at 660nm

제품정보

 제목   제품 비교하기   재고 번호   가격(부가세 별도)  구입하기
2" Fiber Optic Diffuse Axial Illuminators
4" Fiber Optic Diffuse Axial Illuminators

제품설명

Available in two sizes, 2" x 2" and 4" x 4" square apertures, these sources provide full, even illumination over their entire aperture area. Illumination for the 2" model is provided using a standard ¼" light guide (not included). Illumination for the 4" model uses a specially designed quad-branch light guide (not included) that terminates into four 1/8" bundles. Both axial diffusers require a fiber optic illuminator and appropriate light guide adapter. Light Guide Adapters (not included) are required to mate the low-profile Fiber Optic Cable with Fiber Optic Illuminators. Platform, post and adapter shown in photo is for a suggested application only and not included.

제품자료

액세서리

제목 제품 비교하기재고 번호  가격(부가세 별도) 구입하기
MBR type Quad Glass Fiber Optic Cable, 0.354" (9.0mm) Active Fiber Bundle #53-382 KRW 833,800   견적 요청
  • 3~5일내 배송
    ×
 
영업 & 기술 지원
 
본사 및 지사별 연락처 확인하기
빠른
견적 요청 도구
재고 번호 입력 필요
This site is protected by VikingCloud's Trusted Commerce program