제품이 장바구니에 추가됨

ScannerMAX Compact 506 Dual Axis Galvanometer Optical Scanners

ScannerMAX 상세 정보 보기

3mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner

3mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner 5mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner 10mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner ScannerMAX Mach-DSP Digital Servo Driver (included with each galvanometer scanner) +4
×

공통 스펙

Surface Flatness (P-V):
≤λ/4 @ 632.8nm
Coating:
Protected Silver
Substrate:
Silicon (Si)
Operating Temperature (°C):
0 to +50
Power Requirement:
±24 VDC
Position Signal (V):
±10
Current - Peak (A):
Maximum: 10
Current - RMS (A):
1.85 (Case @ 50°C)
Coil Resistance (Ω):
1.8
Rotor Inertia (gm-cm2):
0.014
Torque Constant (dyne-cm/A):
18,400
Coil Inductance (μH):
280
Back EMF Voltage (μV/°/s):
32.1
Model Number:
ScannerMAX Compact 506
Power Supply:
1 x #16-045
Europe (CE Marked): 2 x #14-571
 제목   제품 비교하기   재고 번호   가격(부가세 별도)  구입하기
3mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner #16-036 KRW 4,350,000   견적 요청  
  • 품절/문의요망
    ×
 
5mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner #16-037 KRW 4,060,000   견적 요청  
  • 3~5일내 배송
    ×
 
10mm Aperture, Protected Silver, Compact 506 Dual Axis Galvanometer Scanner #16-038 KRW 4,495,000   견적 요청  
  • 3~5일내 배송
    ×
 

ScannerMAX Compact 506 Dual Axis Galvanometer Optical Scanners are designed for cost-sensitive applications requiring compact, light-weight optical scanners that do not compromise on performance. The Compact 506 series features a sturdy rotor construction and low coil resistance, allowing these galvanometers to achieve reasonably fast scan speeds without producing excessive heat. The patented position sensor design provides these galvanometers with up to ten times the signal-to-noise ratio of conventional galvanometers, ensuring high quality motion. ScannerMAX Compact 506 Dual Axis Galvanometer Optical Scanners are ideal for use in stereo lithography (SLA) 3D printing, LiDAR, handheld medical devices, and laser cleaning applications. Optical scanners with a 3, 5, and 10mm mirror aperture are available with a protected silver coating; please contact us if your application requires a Compact 506 galvanometer scanner with a custom mirror aperture or coating.

ScannerMAX Compact 506 Galvanometer Optical Scanners are driven by the Mach-DSP Servo Driver. This digital servo driver features a compact package size and simultaneously control both X-Axis and Y-Axis scanners. The Mach-DSP can be controlled by both analog and digital signals, and it can be accessed and adjusted using a free GUI software package, which includes a built-in test pattern generator, oscilloscope, and dynamic signal analyzer. The Mach-DSP Servo Driver requires ±24 VDC of power.

Note: For European customers, 2 units of power supply #14-571 are required for operation.

Various longer or shorter galvo to servo cables are available in the accessories tab. Please note that these cables are compatible with all Compact 506 Systems as well as the following list of Saturn Systems:

Any Saturn 1 System (16-039 or 16-042) with Serial Numbers higher than PS102838
Any Saturn 5 System (16-040 or 16-043) with Serial Numbers higher than PS501904
Any Saturn 9 System (16-041, 16-044, 21-969) with Serial Numbers higher than PS903670

Each Compact 506 Dual Axis Galvanometer Optical Scanner ships with:

  • 2 x Compact 506 Series Galvanometer
  • 1 x X-Y Axis Mount
  • 1 x Mach-DSP Servo Driver Board
  • 2 x 1-meter-long cables that connect the galvanometer to the servo driver
  • 1 x Cable kit including power and analog input cables
제목 제품 비교하기재고 번호  가격(부가세 별도) 구입하기
25cm ScannerMAX Galvo to Servo Cable #29-579 신제품 KRW 94,300   견적 요청
  • 3~5일내 배송
    ×
45cm ScannerMAX Galvo to Servo Cable #29-580 신제품 KRW 94,300   견적 요청
  • 3~5일내 배송
    ×
55cm ScannerMAX Galvo to Servo Cable #29-581 신제품 KRW 94,300   견적 요청
  • 3~5일내 배송
    ×
1m ScannerMAX Galvo to Servo Cable #29-582 신제품 KRW 94,300   견적 요청
  • 3~5일내 배송
    ×
2m ScannerMAX Galvo to Servo Cable #29-583 신제품 KRW 143,600   견적 요청
  • 품절/문의요망
    ×
3m ScannerMAX Galvo to Servo Cable #29-584 신제품 KRW 143,600   견적 요청
  • 3~5일내 배송
    ×
4m ScannerMAX Galvo to Servo Cable #29-585 신제품 KRW 143,600   견적 요청
  • 3~5일내 배송
    ×
5m ScannerMAX Galvo to Servo Cable #29-586 신제품 KRW 143,600   견적 요청
  • 3~5일내 배송
    ×
Thermal Grease for Galvanometer Scanner (Optional) #59-024 KRW 29,000   견적 요청
  • 3~5일내 배송
    ×
FB3 Laser/Galvo Control Hardware #21-970 KRW 826,500   견적 요청
  • 3~5일내 배송
    ×

기술 정보

WHAT'S INCLUDED WITH YOUR SCANNERMAX SCANNER
Item Number Description
1 Galvo to Servo Driver Connection Cable (1 with Single Axis Scanners, 2 with Dual Axis)
2 Digital Input Cable for Servo Driver
3 Analog Input Cable for Servo Driver
4 Mach-DSP Servo Driver Board
5 Galvanometer
6 Thermal Paste
7 Power Cable
ScannerMAX Contents
Filter

레이저 부품의 LIDT 이해와 표기

Laser induced damage threshold (LIDT) denotes the maximum laser fluence an optical component can withstand with an acceptable amount of risk.

바로 보기

Beam Combining for Increased Power

When measuring minuscule particles, many advanced Life Science applications require more power than one laser produces.

바로 보기

Pockels Cell

빔의 품질 및 스트렐 비율

There are several metrics used to describe the quality of a laser beam including the M2 factor, the beam parameter product, and power in the bucket

바로 보기

레이저 공진기 모드

The length of a laser resonator determines the laser’s resonator modes, or the electric field distributions that cause a standing wave in the cavity.

바로 보기

Simplifying Laser Alignment

Many challenges can arise when aligning a laser beam; knowing specific tips and tricks can help simplify the process. Learn more at Edmund Optics.

바로 보기

Aligning Mount for AdlOptica Beamshapers

Properly aligning the mechanical mount for AdlOptica laser beam shapers from Edmund Optics is critical for maximizing throughput and performance.

바로 보기

I am using my laser to________, what goggles can you recommend for my application?

Can I see the laser when using safety goggles?

Can I purchase laser safety stickers from Edmund Optics?

How to Align a Laser System

Join Chris Williams as he briefly explains the basics of how to align a laser system onto a target.

바로 보기

Development of a Robust Laser Damage Threshold Testbed

Development of US national laser damage standard: 2020 status

레이저 광학 계측 기술

Metrology is critical for ensuring that optical components consistently meet their desired specifications, especially in laser applications.

바로 보기

Laser Optics Lab Trailer

The Laser Optics Lab video series discusses laser optics concepts including specifications, coating technologies, product types, and more

바로 보기

Introduction to Laser Optics Lab

The Laser Optics Lab video series discusses laser optics concepts including specifications, coating technologies, product types, and more

바로 보기

Laser Optics Lab:Back Reflections

Back reflections are created when some or part of your beam are reflected back to the source.

바로 보기

Laser Optics Lab: Coatings

Optical coatings are composed of thin-film layers used to enhance transmission or reflection properties within an optical system.

바로 보기

Laser Optics Lab:Specifications for Selecting a Laser

When determining which laser to use for your application, consider the following specifications: wavelength, coherence length, beam divergence, and Rayleigh range.

바로 보기

LIGHT TALK - EPISODE 3: Laser Damage Testing with Matthew Dabney

Join our discussion around laser damage testing in the third episode of our LIGHT TALKS series.

바로 보기

LIGHT TALK - EPISODE 4: Lasers & Optics with Kasia Sieluzycka and Nick Smith

Learn about trends in laser applications including increasing powers and decreasing pulse durations in this conversation with Kasia Sieluzycka and Nick Smith.

바로 보기

LIGHT TALK - EPISODE 8: Laser Magic! with Angi Compatangelo

From tattoo removal to diagnosing cancer, lasers can transform our lives in countless ways. Join our conversation about laser in skin care and diagnostics.

바로 보기

What makes laser optics different from normal optics?

Building a Mach-Zehnder Interferometer

Learn how to assemble, align, and use a Mach-Zehnder Interferometer completely out of off-the-shelf products from Edmund Optics in this detailed guide.

바로 보기

Laser

Laser Damage Threshold

Fundamentals of Lasers

Lasers can be used for a variety of applications. Learn how lasers work, different elements, and the differences between laser types at Edmund Optics.

바로 보기
 
영업 & 기술 지원
 
본사 및 지사별 연락처 확인하기
빠른
견적 요청 도구
재고 번호 입력 필요