제품이 장바구니에 추가됨

SCHOTT Harsh Environment Colored Glass NIR Cut-Off Filters

SCHOTT Optical Components 상세 정보 보기
×
  • NIR에서의 높은 흡수
  • 높은 습도의 열악한 환경에서 사용하도록 설계
  • 두께가 1mm인 50 x 50mm 사이즈

공통 스펙

Dimensions (mm):
50.0 x 50.0
Length (mm):
50.00
Coating:
Uncoated
Color:
Blue-Green
Surface Quality:
60-40
Thickness (mm):
1.00 ±0.1
Wavelength:
UV-VIS
Width (mm):
50.00
Dimensional Tolerance (mm):
±0.2
Bevel:
Protective as needed
CWL (nm)  Glass/Filter Number   Dimensions (mm)   Thickness (mm)   제품 비교하기   재고 번호   가격(부가세 별도)  구입하기
500.00 SCHOTT BG60 50.0 x 50.0 1.00 #14-431 KRW 261,000 수량 11+ KRW 230,600   견적 요청  
  • 3~5일내 배송
    ×
 
490.00 SCHOTT BG61 50.0 x 50.0 1.00 #14-433 KRW 261,000 수량 11+ KRW 230,600   견적 요청  
  • 3~5일내 배송
    ×
 
500.00 SCHOTT BG62 50.0 x 50.0 1.00 #14-435 KRW 261,000 수량 11+ KRW 230,600   견적 요청  
  • 3~5일내 배송
    ×
 
480.00 SCHOTT BG63 50.0 x 50.0 1.00 #14-437 KRW 261,000 수량 11+ KRW 230,600   견적 요청  
  • 3~5일내 배송
    ×
 
450.00 SCHOTT BG64 50.0 x 50.0 1.00 #14-439 KRW 261,000 수량 11+ KRW 230,600   견적 요청  
  • 3~5일내 배송
    ×
 
510.00 SCHOTT BG67 50.0 x 50.0 1.00 #14-441 재고정리 KRW 191,300   견적 요청  
  • 품절/문의요망
    ×
 
정확한 사이즈를 찾을 수 없다고요? 여기를 클릭하면, 특정 사이즈에 대한 즉각 견적을 받아보실 수 있습니다.

SCHOTT Harsh Environment 칼라 글라스 NIR(Near-Infrared) 컷오프 필터는 습도 저항성이 높아 열악한 환경에서도 사용가능 합니다. 컬러 이미징 용도를 위해 설계된 이 필터는 트루컬러를 제공하기 위해 고품질 유리 재료로 제조된다. SCHOTT Harsh Environment 칼라 글라스 NIR(Near-Infrared) 컷오프 필터는 두께가 1mm인 표준 50 x 50mm 사이즈로 제공되어 영상 시스템에 쉽게 통합될 수 있습니다. 요청 시 5mm에서 160mm 사이즈의 커스텀도 가능합니다. 자세한 내용은 컬러 유리 필터 제조 기능 웹 페이지를 참조 바랍니다.

Filter Simulation Software

여기를 클릭하면 SCHOTT 글래스 타입별 외부 및 내부 투과율을 산출하는 데 사용할 수 있는 SCHOTT의 컬러 글래스 필터 계산 프로그램을 다운받을 수 있습니다. 이 프로그램은 필터 두께를 사용자가 지정한 개별 필터의 성능 혹은 글래스 타입과 두께를 조절할 수 있도록 필터를 겹쳐서 사용할 경우의 성능을 시뮬레이션합니다.

Filter

Confocal Microscopy

Confocal microscopy provides high resolution, elimination of out-of-focus glare due to spatial filtering, and reduction of light-induced damage to the sample.

바로 보기

Shortpass와 Longpass Filter를 이용한 Custom Bandpass Filter의 제작

Do stock filters not meet your bandwidth or CWL requirements? Learn how custom bandpass filters are created using short or longpass filters at Edmund Optics.

바로 보기

광학 필터의 배치 방향

Unsure which side of your filter should face the light source? Learn how to determine the filter orientation of your TECHSPEC filter at Edmund Optics.

바로 보기

Optical Filter 리뷰

Optical Filters are used to selectively transmit or block certain wavelengths or wavelength ranges within optical systems.

바로 보기

Optical Filter Coatings: Comparison of Traditional and Hard-Sputtered

Confused about the differences between traditional-coated and hard-coated optical filters?

바로 보기

Selecting Color Filter Glass for Life Science Applications

What type of material should I look for in a filter?

How are notch filters designed and manufactured?

Bandpass Filter

Bandwidth(밴드폭)

Cavity

Dichroic Coating

Dichroic Filter

Filter, Colored Glass

Ripple

Trending in Optics: The Future of Optical Filters

New optical filters are being developed due to the advancements in applications and technologies. Learn more about the future of filters at Edmund Optics.

바로 보기

Fluorescence Microscopy를 위한 Fluorophores 및 Optical Filters

Want to know more about fluorophores and optical filters for fluorescence microscopy? Find out more information and in stock optical filters at Edmund Optics.

바로 보기

광학 필터

Do you want to learn about optical filters? Find terminology, fabrication techniques, a selection guide, and application examples at Edmund Optics.

바로 보기

Filtering in Machine Vision

While working with machine vision, there are different types of filters that can be used to alter the image. Find out about the different types at Edmund Optics.

바로 보기

Optical Polarizers 리뷰

Polarizers are used in a wide range of imaging and research and development applications.

바로 보기

Manipulating Wavebands: Color & Filters

Nick Sischka explains why color consideration and illumination are so important for machine vision in this hands-on demonstration from the Edmund Optics 2021 Imaging Innovation Summit.

바로 보기

What happens when a filter is tilted?

How do I determine which side of my filter is coated?

Blocking(차단)

Blocking Range(차단 범위)

Central Wavelength (CWL)

Cold Mirror

Full Width at Half Maximum (FWHM)

Interference Filter

Notch Filter

Peak Transmittance

Rugate Notch Filter

Shortpass Filter

레이저 조명을 이용한 형광 이미징

Fluorescence imaging systems are composed of three major components, an illumination source, a photo-activated fluorophore sample, and detector.

바로 보기

How do I clean my filters?

What is the largest diameter filter available from Edmund Optics®?

What are some of the most common filter substrates?

How do I select the right filter for my application?

What types of filters can Edmund Optics® manufacture?

Do you have mounts for square or rectangular optics?

Cut-Off Wavelength

Cut-On Wavelength

Filter

Fluorescent Filter

Optical Density (OD)

Stopband

광학 현미경 용도: Fluorescence (형광)

Wondering how fluorescence microscopy works? Find out about the technique, systems, and more at Edmund Optics.

바로 보기

Basic Principles of Raman Scattering and Spectroscopy

Raman spectroscopy is a technique used to identify the chemical composition of samples based on how light scatters off of them. Learn more & view related optics

바로 보기

Fluorescence Microscopy: Imaging Filters가 장착된 In-Line Illumination

Want to know about fluorescence microscopy? Read this article by a Biomedical Product Line Engineer at Edmund Optics to learn more.

바로 보기

보호용 플라스틱 코팅 제거

A protective plastic coating protects a variety of our flat optics, such as optical windows, optical mirrors, and beamsplitters, from scratches during shipping.

바로 보기

Parallelism

Surface Flatness

How do I clean my optics?

Clear Aperture (CA)

EO의 글로벌 제조 설비

Edmund Optics® (EO) manufactures millions of precision optical components and subassemblies every year in our 5 global manufacturing facilities.

바로 보기

에드몬드 옵틱스의 계측 기술: 핵심 부품 제조 시 계측 공정

Learn about the metrology that Edmund Optics® uses to guarantee the quality of all optical components and assemblies.

바로 보기
원하는 사양을 아래에 입력하십시오:
필터 번호
This size filter is outside of our standard range. Please contact us to discuss manufacturing feasibility and get a custom quote.
This size filter is outside of our standard range. Please contact us to discuss manufacturing feasibility and get a custom quote.
This size filter is outside of our standard range. Please contact us to discuss manufacturing feasibility and get a custom quote.
해당 부품은 일반적으로 영업일 기준 5일 이내로 발송됩니다. 실제 배송일은 주문 후에 확인할 수 있습니다.
Standard Manufacturing Tolerances:
Edge length and diameter +/-0.2 mm
Thickness For ≤ 1mm: ± 0.1mm
For > 1 – 3mm: ± 0.2mm
Surface Quality 60 – 40
Surface Accuracy ≤8 Waves
Parallelism ≤3 arcmin
Clear Aperture ≥90%
Edges & Bevels Round parts ≥ ∅5mm: polished edges & protective bevel
Square & rectangular parts < 50 x 50mm: polished edges, no bevel
Edge Chips For ≤ ∅80mm: < 0.3mm (5/E0.3),
for ≥ ∅81mm < 0.6mm (5/E0.6)

Surface quality according to DIN ISO 10110:
Polishing quality P2
Defects 5/3 x 0.63
All edges machined
Round filters with chamfer max. 0.5mm, square and rectangular < 50x50mm without chamfer
Edge chips permitted up to 5/E0.3
General Information SCHOTT Optical Filter Glass:
BG Blue, blue-green, and multiband glasses
GG Nearly colorless to yellow glasses, IR transmitting
KG Virtually colorless glasses with high transmission in the visible and absorption in the IR
NG Neutral density glasses with uniform attenuation in the visible range
OG Orange glasses, IR transmitting
RG Red and black glasses, blocking visible, IR transmitting
UG Black and blue glasses, UV transmitting
VG Green glasses
WG Colorless glasses with different cut-offs in the UV, transmitting in the visible and IR ranges
참고: 상기 스펙트럼 곡선은 개별 광학 필터 유리의 내부 투과율을 나타냄
 

 
영업 & 기술 지원
 
본사 및 지사별 연락처 확인하기
빠른
견적 요청 도구
재고 번호 입력 필요