제품이 장바구니에 추가됨

LightPath® Mid-Wave and Long-Wave Infrared (IR) Aspheric Lenses

Lightpath® 상세 정보 보기
×
  • 1.8 - 12μm의 파장 범위
  • 다양한 코팅 옵션
  • 마운트 및 비마운트 버전

공통 스펙

Substrate:
Black Diamond™ BD-2 (Ge28Sb12Se60)
Surface Quality:
80-50
Bevel:
Protective bevel as needed
Density (g/cm3):
4.68
Index of Refraction nd @ 10μm:
2.6023
Index of Refraction nd @ 14μm:
2.5843
Index of Refraction nd @ 4μm:
2.6210
Index of Refraction nd @ 5μm:
2.6173
Thermo-optic coefficient dn/dT:
70 x 10-6/°C from -40° to +80°C (5 - 14 μm)
Transformation Temperature (°C):
285.00
Conjugate Distance:
Infinite
Dia. (mm) EFL (mm) NA  Coating   제품 비교하기   재고 번호   가격(부가세 별도)  구입하기
6.50 4.00 0.56 BBAR (1800-3000nm)
기타 코팅 옵션
×
#66-560 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
6.50 4.00 0.56 BBAR (3000-5000nm)
기타 코팅 옵션
×
#66-561 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
8.00 5.95 0.56 BBAR (3000-5000nm) #87-178 KRW 594,500 수량 11+ KRW 524,900   견적 요청  
  • 3~5일내 배송
    ×
 
3.50 1.50 0.72 BBAR (1800-3000nm)
기타 코팅 옵션
×
#83-717 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
3.50 1.50 0.72 BBAR (3000-5000nm)
기타 코팅 옵션
×
#83-718 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
4.50 1.47 0.83 BBAR (8000-12000nm) #88-073 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
5.50 1.87 0.85 BBAR (1800-3000nm)
기타 코팅 옵션
×
#66-564 재고정리 KRW 305,900   견적 요청  
  • 3~5일내 배송
    ×
 
5.50 1.87 0.85 BBAR (8000-12000nm)
기타 코팅 옵션
×
#66-566 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
6.50 4.00 0.56 BBAR (3000-5000nm)
기타 코팅 옵션
×
#66-569 KRW 522,000 수량 11+ KRW 460,400   견적 요청  
  • 3~5일내 배송
    ×
 
9.25 3.00 0.71 BBAR (1800-3000nm) #88-080 재고정리 KRW 340,700   견적 요청  
  • 3~5일내 배송
    ×
 
6.24 1.50 0.72 BBAR (1800-3000nm) #83-721 재고정리 KRW 289,900   견적 요청  
  • 3~5일내 배송
    ×
 
8.24 1.47 0.83 BBAR (1800-3000nm)
기타 코팅 옵션
×
#88-077 재고정리 KRW 289,900   견적 요청  
  • 3~5일내 배송
    ×
 
8.24 1.47 0.83 BBAR (8000-12000nm)
기타 코팅 옵션
×
#88-079 재고정리 KRW 249,300   견적 요청  
  • 3~5일내 배송
    ×
 
5.50 1.87 0.85 BBAR (1800-3000nm)
기타 코팅 옵션
×
#66-572 재고정리 KRW 340,700   견적 요청  
  • 3~5일내 배송
    ×
 

LightPath® Mid-Wave and Long-Wave Infrared (IR) Aspheric Lenses는 몰딩 디자인으로 설계된 저가형 제품으로서 게르마늄 기판으로 제조되는 비구면 렌즈보다 더 많은 장점을 제공합니다. dn/dT 및 CTE 값이 게르마늄보다 훨씬 작은 이 렌즈는 온도차에 따른 초점 거리의 변화가 더 적습니다. 게다가 작동 온도 또한 게르마늄(100°C에서 20 - 30%의 투과 손실)보다 더 높기 때문에 QCL 레이저용 collimator 용도 및 열화상 어셈블리 부품용으로 사용할 수 있습니다.

Filter

무반사(AR) 코팅

Anti-reflection (AR) coatings are applied to optical components to increase throughput and reduce hazards caused by back-reflections.

바로 보기

광학 코팅 개론

Optical coatings are used to influence the transmission, reflection, or polarization properties of an optical component.

바로 보기

렌즈의 기하학적 형태별 성능 비교

This comparison of the performance of aspheric, achromatic, and spherical PCX lenses in different situations reveals the ideal use cases for each type of lens.

바로 보기

Aspheric Lenses의 모든 것

Learn all about the benefits of aspheres, their unique anatomy, how they're manufactured, and how to choose the right one for your system.

바로 보기

Advantages of using engineered chalcogenide glass for color corrected, passively athermalized LWIR imaging systems

Infrared Light

Optical Engineer Andrew Fisher explains how you can see the "invisible" light, or infrared light, from your own TV remote.

바로 보기

Short Wave Infrared (SWIR, 근적외선)

적외선(IR) 어플리케이션을 위한 올바른 소재

Using an Infrared Application? Discover the importance of choosing the right material and comparisons of each at Edmund Optics.

바로 보기

적외선 용도에서 메니스커스 렌즈 사용시의 이점

Meniscus lenses offer superior performance compared to plano convex lenses in IR applications. Find out the benefits of using a meniscus lens at Edmund Optics.

바로 보기

Is it okay to clean an infrared lens, for example one made of germanium, with ethanol?

Infrared (IR) Spectrum

Mid-spatial frequency errors of mass-produced aspheres

Computer Generated Hologram Metrology

Computer Generated Hologram metrology provides a new solution for overcoming traditional asphere metrology. Learn more about CGH metrology at Edmund Optics.

바로 보기

Aspheric Lens Takeover

Time to Replace Spherical Elements with Aspheric Lenses

바로 보기

UV vs. IR Grade Fused Silica

UV grade fused silica is ideal for UV and visible applications, but IR grade fused silica has better transmission in the IR due to a lack of OH- impurities.

바로 보기

SWIR 이란?

Have a question about short-wave infrared (SWIR)? Find definitions, application uses, and examples at Edmund Optics.

바로 보기

Hyperspectral and Multispectral Imaging

Are you trying to gauge depth of field in your imaging system? Take a closer look at this article on depth of field calculations at Edmund Optics.

바로 보기

초분광 & 다중분광 이미징 – 트렌드 in 광학: 에피소드 7

Hyperspectral and multispectral imaging are imaging technologies that capture information from a broader portion of the electromagnetic spectrum.

바로 보기

You offer many substrates for UV and IR applications. How do I know which is best for me?

비구면 렌즈의 불균일성과 스트렐 비율

The Strehl ratio of an optical system is a comparison of its real performance with its diffraction-limited performance.

바로 보기

Shape Factor Influence in Aspheric Lens Design

Learn how the shape factor of an aspheric lens effects its performance and when certain shape factors are the most advantageous.

바로 보기

ISO Drawings for Aspheric Lenses

Aspheric lens drawings following the ISO 10110 standard are critical tools for communicating manufacturing and testing requirements for the lenses.

바로 보기

Aspheric Lenses 리뷰

What is an aspheric lens? In what applications are aspheric lenses used?

바로 보기

비구면 렌즈 제작 방식

Edmund Optics® manufactures thousands of precision aspheric lenses per month in our asphere manufacturing cell that operates 24 hours a day.

바로 보기

Designing Large Diameter Aspheres

Managing Holography Errors in Asphere Metrology

Properly Designing and Specifying Aspheric Lenses

Spatial Frequencies and Aspheric Lens Performance

Understanding Aspheric Lenses

Aspheres: The impact of shape factor on asphere design

Aspheres: Still Adding Value

The Long and the Short of It: Techniques for Measuring Aspheres

Does Edmund Optics® sell Computer Generated Holograms?

Is there a limit to the range of angles in which a CGH can be used?

Should the aspheric surface of an asphere always face the object / light source?

How do I know if angle of incidence (AOI) and deposition effects during coating will be an issue for me when looking at off-the-shelf aspheres?

Are all aspheric lenses from Edmund Optics® polished using magnetorheological finishing (MRF)?

No, advances in subaperture polishing have allowed for the fabrication of aspheres with surface figure error down to λ/20 (0.25µm). However, MRF is still...

바로 보기

What are the challenges associated with increasing the diameter of optics like aspheric lenses?

The CNC polishing equipment used to fabricate the optics must have a large enough range of motion to properly polish the full asphere, and the weight of the...

바로 보기

What are aspheric condenser lenses?

Why plastic aspheric lenses?

What exact kind of metrology does Edmund Optics use to support its asphere manufacturing?

Does Edmund Optics still use magnetorheological finishing for high quality aspheres?

What are the different types of aspheric lenses?

Aspheric Lens(비구면 렌즈)

CNC Polished Aspheric Lenses

CNC polished aspheric lenses offer high numerical apertures while creating diffraction-limited spot sizes and are ideal for high-precision applications.

바로 보기

Mid-Spatial Frequency (MSF) Errors

Deviations in surface form relative to an ideal shape at higher spatial frequencies than Zernike polynomial aberrations but lower frequencies than roughness.

바로 보기

Plastic Molded Aspheric Lenses

Lightweight, cost-effective aspheric lenses with a lower scratch resistance and thermal stability than molded glass aspheres.

바로 보기

Precision Glass Molded Aspheric Lenses

Meta description: Ideal for volume applications, including laser diode collimation, bar code scanners, and optical data storage. Can be molded into diameters as small as 1mm.

바로 보기

Spherical Aberration

시네마 렌즈, 스트리밍의 시대, 그리고 비구면 렌즈

Cinema lenses designed to create content tailored for online streaming utilize aspheres to shoot with a shallow depth of field while maintaining quality.

바로 보기

Aspherized Achromatic Lenses 리뷰

Aspherized Achromatic Lenses, exclusive to Edmund Optics, are doublet lenses consisting of two cemented optical elements that are matched for their color-correction ability and small RMS spot size.

바로 보기

Modifying Stock Optics Tip #3: Turn A Sphere Into An Asphere

Join Andrew Fisher, Manufacturing R&D Engineer at Edmund Optics, as he discusses some tips for modifying stock optical components to fit your application's needs.

바로 보기

What are the benefits of aspheric lenses compared to standard singlet lenses?

Is CGH metrology used for measuring any other products besides aspheric lenses?

What are the accuracy limitations of a CGH?

Hybrid Molding

Resolution 및 Contrast의 한계: The Airy Disk

The diffraction pattern caused when light passes through an aperture is called the Airy Disk. Find out how the Airy Disk can impact your image at Edmund Optics.

바로 보기

Aspherized Achromatic Lenses

Want an inside look at Aspherized Achromatic Lenses? Learn about the advantages, composition, and aspherized process at Edmund Optics.

바로 보기

What is the difference between an inked lens and a non-inked one?

If I want to design with your lenses and lens assemblies, how do I get the information that I need?

Now that I have chosen my lens, how do I mount it?

Chromatic Focal Shift

Conjugate Distance

Edge Thickness (ET)

Effective Focal Length (EFL)

Finite/Finite Conjugate

Power

Singlet Lens

Strehl Ratio

Optical Lens 설정의 배율 확인 방법

When doing basic imaging, how do you determine the magnification an optical lens will provide?

바로 보기

Optical Lens의 Focal Length를 파악하기 위한 Collimation 이해

Collimated light occurs when light rays travel parallel to each other.

바로 보기

Optical Lens 설정을 통한 이미지 형성 방법

Although a common misconception, individual optical lenses do not always form an image when the object plane is placed a focal length away from the lens.

바로 보기

Modifying Stock Optics Tip #4: Add A Coating To A Stock Lens

Join Andrew Fisher, Manufacturing R&D Engineer at Edmund Optics, as he discusses some tips for modifying stock optical components to fit your application's needs.

바로 보기

Diffraction Limit (회절 제한)

Irregularity

Radius of Curvature

BBAR Coating

Diopter

Anti-Reflection (AR) Coating

Bevel

Seamed Edge

Introduction to Basic Ray Optics

An understanding of refraction and basic ray optics is a critical foundation for understanding more complicated optical concepts and technologies.

바로 보기

Meet Jeremy Govier: Asphere Guru

The Future Depends on Optics®

바로 보기

Surface Flatness

Transmission

How do I clean my optics?

EO의 글로벌 제조 설비

Edmund Optics® (EO) manufactures millions of precision optical components and subassemblies every year in our 5 global manufacturing facilities.

바로 보기

에드몬드 옵틱스의 계측 기술: 핵심 부품 제조 시 계측 공정

Learn about the metrology that Edmund Optics® uses to guarantee the quality of all optical components and assemblies.

바로 보기

Clear Aperture (CA)

Refraction

Surface Quality

 
영업 & 기술 지원
 
본사 및 지사별 연락처 확인하기
빠른
견적 요청 도구
재고 번호 입력 필요